Infinity Machine International Inc.
Infinity Machine International Inc.
Infinity Machine International Inc.

Tel: +86-(0)769-87796906
Fax: +86-(0)769-83428065
Contact: travis lau
E-mail:
travis.lau@infinity-machine.com
Website: www.infinity-machine.com
Factory Add: No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China

Infinity Machine International Inc.
Plug and unplug testing machine
Plug and unplug testing machine
1

Name:Connector Force and Life-time Tester

零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
Model:
IN-I5150
数量
-
+
库存:
0
1
Purpose
Specification
Advantages
Accessories
Software
Video
Similar Products

 

Name: ConnectoInsert and Extract Force and Life-time Tester

 

Model: IN-I5150

 

Purpose:

 

Push-pull force test machine is used in the insertion and extraction force tests of various kinds of connectors. Equipped with an automatic

axopetal device and the special fixture for all kinds of connectors, it can ensure accurate insertion and extraction force results.

Push pull force testing machine adopts the Windows program, which is easy to operate and can automatically store test data (such as load

-stroke curve, load life die-away curve and test results) and all test conditions. The machine also adopts high-precision load

cell measurement and servo motor drive, which ensures accurate insertion and extraction force results, making it an essential

detecting instrument in the development and research and quality inspection of connector manufacturers and finished products manufacturers.

Connnector push and pull tester is also have the special fixture which has 5 stations which enable the tester to do fatigue test for 5 connectors.

 

Typical Application:

 

Connector whole line insertion and extraction test      

Connector single port insertion and extraction test

Connector insertion and extraction duration test    

Connector single pin and plastic retention test

Connector normal force test         

Connector clip compression test

Connector dynamic impedance test       

Various tensile and pressure test

Connector dynamic impedance test (optional)

Fatigue test for 5 connectors at the same time

 

  Specification:

 

Model

IN-I5150

Capacity

50kgf

Unit(Switchable)

kgf, N, Lb, gf

Load accuracy

±0.2%

Load least display

0.01kgf or 0.01gf

Test stroke

0~150mm

Stroke least  display

0.001mm

Effective width

410mm

Test speed

0~ 600mm/min

Speed accuracy

±0.5%

Sample size(max)

W90xD45xH150mm

Connector lifetime tests

5set

Test cycles

1~999,999

Motor

AC servo motor

Main Unit Dimension

W580xD370xH1140mm

Main Unit weight

92kg

Fixture weight

22kg

Computer & monitor weight

13kg

Power

AC100V 3A

Emergency stop time

100ms

 

 

Advantages:

Connector Force and Life-time Tester

 

Fatigue Test for with special additional fixture

 

The fatigue test is only to do the inserting and extracting test, it will not connector to transducer to get the test graph and measure the force. The fixture has 5 stations which enable to do the fatigue test for 5 connectors together.

 

The fixture for fatigue test for 5 connectors.

 

Connector Force and Life-time Tester

 

The fatigue test interface:

 

Connector Force and Life-time Tester

 

Fatigue Testing:

when this testing is conducted, there is no need to collect the force value, and the force sensor shall be removed. The following interface appears after clicking the method.

 

Connector Force and Life-time Tester

 

Position: show the testing route.

Zero: click this button to clear the current position value. The value which is cleared shall serve as the original position.

Count: show the number of tests.

Zero: click this button to clear the current numbers of test.

Time: show the operating time of the test.

Start Position: set the start position. For example, set the start position for 2mm as shown in the above figure; the machine

will start fatigue testing from 2mm away from the original position to 14mm 2-14-2-14…, and it will not return to zero

position. If this value is set to “0”, the test will start from “0” to 14mm and then move back to “0”.

Test Position: set the testing route which also means the target value. Set the position for 14mm as shown in the above

figure, so the beam shall be moved to the position of 14mm during the test and then shall automatically return. This value

also means the protective conditions of the testing route which aimed to prevent the test failing or crashing machine. So,

more attention shall be paid to set up this value.

Cycle: set the cycle of fatigue testing in accordance with the requirements.

Hold Timebe used as a connector to insert to stop the time.

Start Speed: set the speed from the original position to the testing start position.

Test Speed: set the go (inserting) speed of the fatigue testing.

Back Speed: set the back (pulling) speed of the fatigue testing.

Interval: set the interval of the test, namely, the standing time after each inserting & pulling.

Start Test: click this button to start the test.

Stop Test: click this button to stop the test.

Zero Position: click this to move up and down the crossbeam to original position during stop situation.

Exit Test: Exit Test.

 

Video:

 

Please help to contact us for more details.

搜索

Contact Us

+86-(0)769-83428065

NO.103 Building 4,No.27,Beihuan Road,Wangniudun Town,Dongguan City,Guangdong Province,China

东莞市万材智能设备有限公司   Copyright  Since 1998-2016   粤ICP备08132298号   Powered by www.300.cn